ULTRA THIN CUTTING DISCS– PLATINUM with Ceramic »Precisiod for maximum manufacturem performance »Extended disc life with reduced dust »Faster cutting to maximise productivity Iron free, suitable for use on all ferrous metals »Compliant with MPA, ISO 2000. Diameter mm (Inch) Thickness (mm) Center Hole (mm) Max.Speed Rpm Qty per Pack Qty per Carton 100(4”) 1.0 16.0 15,300 25 400 115(4.5”) 1.0 22,2 13,300 25 200 125 (5”) 1.0 22,2 12,200 25 200 125 (5”) 1.6 22,2 12,200 25 200 180(7”) 1.6 22.2 8,600 25 100 230(9”) 1.9 22,2 6,600 25 100                        

1)    Super Convex Ceramic »Specially shaped flap disc with lamellae that are rounded off towards the outer edges. »Thanks to the special design it is particularly suited for processing fillet welds; making faster and more efficient processing possible; also suitable for surface grinding »Very high material removal with very high tool life thanks to the use of ceramic grain. »Cool cut for materials with poor thermal conduction »For grinding of steel and stainless steel. Ideal for extreme grinding jobs like processing high-alloy steels, titanium alloys, nickel-based alloys as well as chromium and chromium-nickel steels, brass and bronze thanks to high load capacity. »Uniform grinding result, comfortable grinding with only low vibration »Maximum working speed 80 m/s Diameter mm (Inch) Center Hole (mm) Grit # Qty per pack Qty per Carton 125(5”) 22,2 P60 25 200 125 (5”) 22,2 P80 25 200 150 (6”) 22,2 P60 25 200 150(6”) 22.2 P80 25 100               2)    Super Ceramic »Extremely high material removal with little effort thanks to the self-sharpening ceramic grain. »Excellent results for surface and edge grinding of steel and stainless steel. Ideal for extreme grinding jobs like processing high-alloy steels, titanium alloys, nickel-based alloys as well as chromium and chromium-nickel steels, brass and bronze thanks to high load capacity. »Very high tool life; cool grinding on surfaces and edges »Uniform grinding result, comfortable grinding with only low vibration »Maximum working speed 80 m/s »Tilted version: angle of attack 7-9° Diameter mm (Inch) Center Hole (mm) Grit # Qty per pack Qty per Carton 115(4.5”) 22.2 P40 25 200 115(4.5”) 22,2 P60 25 200 115(4.5”) 22.2 P80 25 200 125(5”) 22,2 P40 25 200 125 (5”) 22,2 P80 25 200 125 (5”) 22,2 P60 25 200                   ⅡFlap disc with Zirconia Aluminum »Specially shaped flap disc with lamellae that are rounded off towards the outer edges. »Grinding media: Zirconia alumina »Thanks to the special design it is particularly suited for processing fillet welds; making faster and more efficient processing possible; also suitable for surface grinding »High material removal with very high tool life thanks to the use of zirconia alumina »Suitable for processing stainless steel and steel »Uniform grinding result, comfortable grinding with only low vibration »Maximum working speed 80 m/s Diameter mm (Inch) Center Hole (mm) Maximum Speed Qty per pack Qty per Carton 115(4.5”) 22.2 13,300 25 200 125(5”) 22,2 12,200 25 200 180 (7”) 22,2 8,500 25 100             Ⅲ Flap disc with Aluminum »Suitable for rough and intermediate grinding of steel, non-ferrous metals, wood and plastics »High lamellar lining on fiberglass pad »Uniform grinding capacity »Cool grinding »Low noise level »Uniform grinding result, comfortable grinding with only low vibration »Maximum working speed 80 m/s. Diameter mm (Inch) Center Hole (mm) Maximum Speed Qty per pack Qty per Carton 115(4.5”) 22.2 13,300 25 200 125(5”) 22,2 12,200 25 200 180 (7”) 22,2 8,500 25 100        

Advantage:These abrasive disc made from polyurethane coated nylon cord, durable resin coating on  a tough nylon mesh ensures long life. Uniform grinding effect, less dust and low noise. Wear resistance, uniform grinding effect. Fit for most of 125mm/4.9" angel grinders.      These discs condition, clean, and finish workpiece surfaces without undercutting the base material.  They produce a brushed or lightly grained finish, especially suitable for stainless steel applications.  In addition, they have layered flaps which last five times longer than traditional flat Strip&Clean Discs.   Typical applications include gasket removal, coatings removal, cleaning weld splatter, and removing heat  discoloration. They leave surfaces with a uniform satin finish.

Product Introduction The 4 Inch Non Woven Polishing Wheel is a multi-functional grinding and finishing tool, which consists of three main components: back plate, adhesive and emery cloth. The rectangular plates are overlapped and glued to the back plate. 4 Inch Non Woven Polishing Wheel is divided into: polishing cloth wheel, hemp wheel, nylon wheel, wiring wheel, wind wheel, wool wheel, etc. There are varieties of polishing wheels.   Advantages The 4 Inch Non Woven Polishing Wheel can prevent the surface of the workpiece from changing the apparent size with flexible grinding and cutting control. The fibers are constantly worn during the grinding process, and new grinding ore is formed naturally, thus providing consistent quality of processing. It makes the treatment effect: even, shiny and firm. It is anti-clogging, oil-proof and waterproof.   1.Technical Data: 4 inch non woven polishing wheel Size D * H * D (mm) 4inch Brand Name HAMBO Diameter 100mm Thickness 12mm Hole Size 16mm Grit 36-1500# Harness   2P-12P Shape Flat Color Black, Marron, Green, etc   Max Speed 35m/s Usage For polishing, etc   2.Main Features: Cold cut The open-hole three-dimensional structure can effectively dissipate heat, avoiding the phenomenon of discoloration, deformation and adhesive residue. High durability We use a special binder to re-card the fibers (and sort, etc.) in a special process. Even under high tensile strength or high temperature, it can also be used to ensure its best performance. Therefore, they greatly increase the service life of the product. Applications range from heavy cutting to surface mixing.